You are here:

Halo Djd Supa Drive Rear Hub

Halo Djd Supa Drive Rear Hub

Halo Djd Supa Drive Rear Hub


Wheels
Halo
DJD S.DRIVE Dirt Jump Disc, Single Speed, 11T Bush Drive, SupaDrive 120T engagement, Bolt-in - DJD Supa Drive Rear HubDeveloped with the help of Sam Pilgrim (and chosen by Matt Jones, Blake Samson and Sam Reynolds) we have taken the best-selling DJD Bush Drive hub and improved it further by adding the proven 120 teeth triple wedge pawl mechanism of the Supa Drive hub. This provides positive and secure drive, a freewheel sound like no other and micro-notch engagement gaps for that perfect pedal pick-up.BD hubs have been utilised successfully in the hardcore BMX market for quite a while, and the advantages of their lighter weight and improved durability over cartridge bearings are pretty well proven, especially when using compact cog sizes. The stresses caused in a Single Speed hub can be huge and, a bush spreads the loads involved over a much larger surface area than ball bearings can achieve, and therefore helps to avoid premature bearing failure.In addition to the BD features, we have fitted a lightweight alloy axle with tough, replaceable, M10 bolt-in Cro-Mo fixings and alloy caps. We also know that bolt-in fittings can be tricky if the axle starts to spin when turning the bolt, (as you have nothing to hold) - so we have also added a 6mm Hex broach deep inside the axle - just in case the axle starts to spin when you don't want it to!14mm adaptors included: the large surface faces of the cones allow us to also use 10-14mm adaptor washers - making this hub suitable for 10mm or 14mm dropouts.,Forged & CNC finished body with slotted flanges.,Bush Driver with screw-on 11T sprocket.,Hollow Alloy axle with 6mm central hex.,Cr-Mo M10 Bolt-in fixings.,14mm adaptors included..FeaturesSuper strong lightweight alloy axle.,2 sealed main body bearings and 1 hardened plastic driver bush.,3 wedge pawls ensure positive drive.,120 points of engagement.,Lightweight forged CNC finished alloy hub shell.,11T x 1/8 drivers sprocket fitted standard. ,9,10,11,13,14,16t sprockets also available.SpecificationsDrillings : 32 or 36H,Axle : Hollow Alloy axle with 6mm central hex,Disc Mount : 6 Bolt,Centre to Flange Center Left: 34mm, Center Right: 35mm,OLD 135mm,Dimensions : Flange Diameter: 58mm,Colour : Red or Black,Weight : 326g.
£209.99

Visit Store

Add a Review/Comment

 

Similar Products